🔧 Chery Service Reset Tool
Step-by-step guides to reset service indicators after maintenance
Step 1: Select Your Model
Step 2: Select Service Type
Step 3: Engine Oil & Filter Reset Guide
Reset oil service light after oil change
Reset Steps
- 1Turn ignition to ON (engine off)
- 2Press and hold trip meter reset button for 10 seconds
- 3Release button when service light flashes
- 4Turn ignition OFF
- 5Start engine to verify light is reset
Tools Needed
- 🔧OBD2 scanner (optional)
- 🔧Owner's manual
⚠️ Important Warnings
- •Ensure oil level is correct before reset
- •Use recommended oil grade (5W-30 for most models)
❓ Frequently Asked Questions
When should I reset the service light?
Reset the service light immediately after completing maintenance. This ensures accurate tracking of your next service interval. Never reset before the service is done.
Can I reset the service light myself?
Yes, most service lights can be reset using the steps in this tool. However, some advanced resets (transmission adaptation, BMS) may require professional OBD2 tools. Always consult your owner's manual.
How much do Chery services cost in Australia?
Basic oil service: $80-$150 AUD. Brake service: $200-$500 AUD. Transmission service: $250-$600 AUD. Costs vary by location and service provider. Get multiple quotes.
What happens if I don't reset the service light?
The light will stay on and may trigger a warning chime. While not dangerous, it makes it hard to track your actual service intervals. Reset immediately after maintenance.
🔧 Check Engine Light On?
Use our OBD2 Lookup tool to diagnose fault codes and get repair guidance.
Try OBD2 Lookup →⚠️ Disclaimer: This tool provides general guidance only. Always consult your owner's manual and a certified mechanic for model-specific instructions. Repair costs are estimates based on Australian market data (July 2026) and may vary.
Safety notice: Improper maintenance can void your warranty and cause safety hazards. If unsure, seek professional service.