MaintenanceBeginner25 min

Chery Tire Maintenance & Rotation Guide

How to check tire pressure, tread depth, and rotate tires on your Chery. When to replace and Australian tire costs.

Tools & Materials Needed

  • Tire pressure gauge
  • Tire tread depth gauge
  • Jack
  • Wheel brace

Step-by-Step Instructions

  1. 1

    Check tire pressure monthly (when tires are cold). Chery recommended pressure: 2.3-2.5 bar (33-36 psi) - check door jamb sticker

  2. 2

    Tire tread depth: Minimum legal = 1.6mm. Replace at 3mm for safety. Use tread depth gauge or 20c coin test

  3. 3

    Tire rotation: Every 10,000 km. Pattern depends on tire type (directional vs non-directional)

  4. 4

    Front-wheel drive: Move front tires to rear (same side), rear tires to front (cross pattern)

  5. 5

    Uneven wear patterns: Outer edge = under-inflation, Inner edge = over-inflation, Center = over-inflation, One side = alignment issue

  6. 6

    Wheel alignment: Check annually or if car pulls to one side. Cost: $120-180

  7. 7

    Tire replacement: Replace in pairs (both front or both rear). Don't mix tire brands on same axle

  8. 8

    Tire costs (Australia): $150-250 per tire for mainstream brands (Hankook, Kumho, Bridgestone)

  9. 9

    Premium tires (Michelin, Continental): $280-400 per tire

  10. 10

    Pro tip: Check spare tire pressure when checking other tires - often neglected!

Applicable Models

Tiggo 4Tiggo 7Tiggo 8Arrizo 5Omoda 5

⚠️ Safety Notice:Always follow proper safety procedures when working on your vehicle. If you’re unsure, consult a professional mechanic. This guide is for informational purposes only.