TroubleshootingIntermediate45 min

Chery Brake System Troubleshooting Guide

How to diagnose and fix common brake problems on Chery vehicles - squeaking, grinding, soft pedal, and warning lights.

Tools & Materials Needed

  • Jack
  • Jack stands
  • Wrench set
  • Brake cleaner

Step-by-Step Instructions

  1. 1

    Symptom: Squeaking noise when braking - Likely worn brake pads. Inspect pad thickness (replace if <3mm). Cost: $150-300 per axle

  2. 2

    Symptom: Grinding noise - Metal-on-metal contact, pads completely worn. Replace pads AND inspect rotors. Cost: $300-600

  3. 3

    Symptom: Soft/spongy brake pedal - Air in brake lines or worn brake fluid. Bleed brakes and replace fluid. Cost: $120-180

  4. 4

    Symptom: Car pulls to one side when braking - Stuck caliper or uneven pad wear. Inspect calipers and replace as needed. Cost: $250-500

  5. 5

    Symptom: Brake warning light on - Check brake fluid level (low = leak or worn pads). Inspect for leaks. Cost: $50-200

  6. 6

    Symptom: Steering wheel vibrates when braking - Warped brake rotors. Machine or replace rotors. Cost: $200-400 per axle

  7. 7

    Prevention: Use OEM brake pads, replace fluid every 2 years, avoid aggressive braking

  8. 8

    Pro tip: Always replace brake pads in pairs (both front or both rear), never one at a time

Applicable Models

Tiggo 4Tiggo 7Tiggo 8Arrizo 5Omoda 5

⚠️ Safety Notice:Always follow proper safety procedures when working on your vehicle. If you’re unsure, consult a professional mechanic. This guide is for informational purposes only.

Related Guides